Products
Engineering Services
About Us
The
Centronic Series 5T detectors offer high blue sensitivity
coupled with high shunt resistance and low dark leakage current. They are
particularly suited to low light level applications from 430-900 nm where the
highest signal to noise ratio is important. They may be operated
photovoltaically or with a reverse bias of up to 12V where lower capacitance
is needed. The 5T range provides the most economic solution for all
applications where high speed of response above 800 nm is not critical.
Electrical / Optical Specifications
Characteristics measured at 22°C (±2) ambient, and a reverse bias of 12 volts,
unless otherwise stated. Shunt Resistance measured at ± 10mV.
For rise time on Quadrants, Linear and Matrix Arrays take figures for single
element diodes having equivalent active area
Single Elements
| Type No. |
Active Area | Responsivity A/W λ = 436 nm |
Dark Current (nA) | NEP WHz-½ λ = 436 nm Typ. |
Capacitance pF | Shunt Resistance Meg. ohms |
Risetime ns λ = 820 nm RL = 50 Ω Typ. |
Package | |||||
| mm2 | mm | Min. | Typ. | Max. | Typ. | Vr=0 V Max. |
Vr=12V Max. |
Min. | Typ. | ||||
| OSD1-5T | 1 | 1.13 dia | 0.18 | 0.21 | 1 | 0.2 | 2.5e-14 | 35 | 7 | 250 | 1000 | 7 | 1 |
| OSD3-5T | 3 | 2.16 x 1.4 | 0.18 | 0.21 | 2 | 0.5 | 3.0e-14 | 80 | 20 | 100 | 700 | 9 | 1 |
| OSD5-5T | 5 | 2.52 dia | 0.18 | 0.21 | 2 | 0.5 | 3.3e-14 | 130 | 35 | 100 | 600 | 9 | 3 |
| OSD7.5-5T | 7.5 | 2.75 x 2.75 | 0.18 | 0.21 | 3 | 1 | 4.6e-14 | 180 | 40 | 60 | 300 | 10 | 3 |
| OSD15-5T | 15 | 3.8 x 3.8 | 0.18 | 0.21 | 5 | 1 | 5.5e-14 | 390 | 80 | 50 | 200 | 12 | 3 |
| OSD35-5T | 35 | 5.9 x 5.9 | 0.18 | 0.21 | 10 | 2 | 7.5e-14 | 950 | 200 | 20 | 100 | 20 | 8 / 23 |
| OSD50-5T | 50 | 7.98 dia | 0.18 | 0.21 | 15 | 5 | 1.6e-13 | 1300 | 270 | 5 | 25 | 26 | 9 |
| OSD60-5T | 62 | 7.9 x 7.9 | 0.18 | 0.21 | 25 | 6 | 2.3e-13 | 1800 | 310 | 3 | 12 | 30 | 9 |
| OSD100-5T | 100 | 11.3 dia | 0.18 | 0.21 | 30 | 8 | 2.1e-13 | 2500 | 520 | 2 | 15 | 45 | 13 |
| OSD300-5T | 300 | 19.54 dia | 0.18 | 0.21 | 200 | 30 | 3.5e-13 | 7500 | 1500 | 1 | 5 | 125 | 15 |
Quadrants (Values given are per element unless otherwise stated)
| Type No. |
Active Area (Total) |
Responsivity A/W λ = 436 nm |
Dark Current (nA) | NEP WHz-½ λ = 436 nm Typ. |
Capacitance pF | Shunt Resistance Meg. ohms |
Crosstalk% λ = 900 nm |
Package | |||||||
| mm2 | mm | Sep. mm | Min. | Typ. | Max. | Typ. | Vr=0 V Max. |
Vr=12V Max. |
Min. | Typ. | Max. | Typ. | |||
| QD7-5T | 7 | 2.99 dia | 0.2 | 0.18 | 0.21 | 6 | 2 | 2.3e-14 | 50 | 15 | 80 | 1200 | 5 | 1 | 7 |
| QD50-5T | 50 | 7.98 dia | 0.2 | 0.18 | 0.21 | 30 | 3 | 4.6e-14 | 330 | 80 | 10 | 300 | 5 | 1 | 10 |
| QD100-5T | 100 | 11.3 dia | 0.2 | 0.15 | 0.18 | 50 | 5 | 7.0e-14 | 650 | 130 | 5 | 100 | 5 | 1 | 11 |
Linear Arrays (Values given are per element unless otherwise stated)
| Type No. |
No. of Elements | Array Dimensions | Responsivity A/W λ = 436 nm |
Shunt Resistance Megohms |
NEP WHz-½ λ = 436 nm |
Capacitance pF | Dark Current nA |
Package | |||||||
| Area mm2 |
Width mm |
Lgth. mm |
Sep. mm |
Min. | Typ. | Min. | Typ. | Vr=0V Min. |
Vr=12V Typ. |
Max. | Typ. | ||||
| LD2A-5T | 2 | 1.00 | 2.0 | 0.5 | 0.05 | 0.18 | 0.21 | 100 | 1000 | 2.5e-14 | 30 | 6 | 2 | 0.7 | 4 |
| LD2B-5T | 2 | 2.02 | 1.422 | 1.422 | 0.45 | 0.18 | 0.21 | 50 | 1000 | 2.5e-14 | 60 | 12 | 5 | 1 | 4 |
| LD2C-5T | 2 | 0.483 | 1.27 | 0.38 | 0.05 | 0.15 | 0.18 | 100 | 1000 | 2.9e-14 | 15 | 4 | 2 | 0.5 | 2 |
| LD4C-5T | 4 | 0.64 | 0.8 | 0.8 | 0.3 | 0.15 | 0.18 | 40 | 500 | 4.0e-14 | 38 | 10 | 10 | 1 | 6 |
| LD12A-5T | 12 | 0.25 | 0.5 | 0.5 | 0.05 | 0.15 | 0.18 | 100 | 2000 | 2.0e-14 | 10 | 3 | 5 | 0.5 | 21 |
| LD16C-5T | 16 | 0.035 | 0.2 | 0.175 | 0.025 | 0.15 | 0.18 | 100 | 2000 | 2.0e-14 | 10 | 2 | 5 | 0.5 | 20 |
| LD16(1.8)-5T | 16 | 1.8 | 2.1 | 0.9 | 0.1 | 0.18 | 0.21 | 100 | 1500 | 2.0e-14 | 60 | 11 | 5 | 0.5 | 16 |
| LD16(2.5)-5T | 16 | 2.5 | 2.5 | 1 | 0.5 | 0.18 | 0.21 | 100 | 1500 | 2.0e-14 | 80 | 14 | 5 | 0.5 | 16 |
| LD20-5T | 20 | 3.60 | 4.0 | 0.90 | 0.05 | 0.18 | 0.21 | 100 | 1000 | 2.5e-14 | 130 | 20 | 5 | 0.5 | 16 |
| LD20(0.36)-5T | 20 | 0.36 | 0.6 | 0.6 | 0.1 | 0.18 | 0.21 | 100 | 2000 | 1.7e-14 | 15 | 5 | 5 | 0.5 | 16 |
| LD35-5T | 35 | 4.42 | 4.6 | 0.96 | 0.03 | 0.18 | 0.21 | 40 | 2000 | 1.7e-14 | 130 | 25 | 5 | 0.5 | 17 |
| Matrix Arrays (Values given are per element unless otherwise stated) | |||||||||||||||
| MD25-5T | 5 x 5 | 7.99 | 2.7 | 2.7 | 0.1 | 0.15 | 0.18 | 5 | 200 | 6.4e-14 | 240 | 47 | 50 | 5 | 18 |
Note: Recommended operating voltage range 0 to 12 volts, for all Series 5T Detectors.
Highlighted items are Centronic standard products generally available from stock
Due to our policy of continued development, specifications are subject to change without notice.
Contact Us Agents & Distributors Downloads Sitemap Links
©Centronic 2008 Tel : UK +44 (0)1689 808000 US +1 (281) 578 7900